Using Kubos Linux

Overview

This document is intended as an general guide for creating, loading, and using Kubos projects and other files within the user space of Kubos Linux.

Debug Console

Each board will have some debug port available, which will then be connected to your computer via USB. See the appropriate Working with {board} document for more information.

If the target board is correctly connected to your host computer, you should see a /dev/ttyUSB* device in your vagrant VM. The VM is set up to automatically forward any FTDI cables that connect to a /dev/FTDI device for ease-of-use.

The vagrant image comes pre-packaged with a minicom serial connection configuration file. You can connect with this configuration file using the command

$ minicom kubos

Alternatively, you can manually create a serial connection with minicom (or other terminal application) using the following connection configuration:

Setting Value
Baudrate 115200
Bits 8
Parity N
Stop Bits 1

Once connected, you can log in using either a user that you’ve created, or root, which has a default password of ‘Kubos123’.

Fully logged in, the console should look like this:

Welcome to Kubos Linux

Kubos login: root
Password:
Jan  1 00:00:16 login[212]: root login on 'ttyS0'
~ #

Warning

Please make sure to either logout of your board, or change it back to the root user’s home directory before beginning any file transfer

User Applications

User applications are created, built, and flashed onto a target board as Kubos SDK projects.

Building a Project

Projects are created and built with the standard Kubos SDK commands.

For example:

$ kubos init -l newproj
$ kubos target kubos-linux-isis-gcc
$ kubos build

Note

You must use the -l|--linux option with kubos init in order to properly create a project for Kubos Linux.

Configuring a Project

Once a project has been created, it can be configured with the project’s config.json file. This file is not created by default, so will need to be manually created. It will reside in the top-level directory of the Kubos SDK project.

More information about project configuration can be found in the Kubos Project Configuration doc.

There are a few relevant configuration options for Kubos Linux:

Updating Credentials

Ideally, you should not be using the default root user password. If you’ve changed it, you’ll need to pass the new password to the Kubos flash utility through the config.json file, which should be located in the top-level directory of your project. You’ll need to create the file if it doesn’t already exist. Update the system.password parameter with the password to use.

If you’re creating a brand new config.json file, you can just copy and paste the text below (newpass should be your desired password):

{
    "system" : {
        "password" : "newpass"
    }
}

Setting Initialization Configuration

There are several config.json options available which customize how and when a user application is started:

  • system.initAfterFlash - (Default: false) Tells the Kubos SDK whether to start the application as a background daemon after flashing it to the board.
  • system.initAtBoot - (Default: false) Tells the Kubos SDK whether to generate and install an initialization script.
  • system.runLevel - (Default: 50. Range: 10-99) Sets priority of initialization script.

When the system.initAfterFlash option is turned on, the user application will be started as a background daemon at the end of the kubos flash process. This is done using Linux’s start-stop-daemon command. By default this feature is turned off, so the value of the option will need to be set to “true” by the user in order to turn it on.

If enabled, an initialization script will be generated and installed during the flashing process. This script will follow the naming convention of “S{runLevel}{applicationName}”, where “runLevel” is the initialization priority order of the script. All user application init scripts will be run after all of the Kubos init scripts, but within the user scripts, the scripts with the lowest run level will be executed first. So an application with a run level of 10 will be initialized before an application with a run level of 50.

The run level of an initialization script can be changed after initially flashing the script to the board. Simply change the system.runLevel value, rebuild the project, and then reflash it to the board. The old script will be removed as part of the flash process.

Flashing an Application

The board should be connected to your computer and it should be fully powered.

Warning

Please make sure to either logout of your board, or change it back to the root user’s home directory before beginning any file transfer

Assuming you’ve successfully built a Kubos SDK project for the desired target, when you issue the kubos flash the output should look like this:

info: found newproj at source/newproj
Compatible FTDI device found
Sending file to board...
Bytes Sent: 693248/1769379 BPS:8343 ETA 02:08
Transfer Successful
Execution time: 21 seconds

The application binary will be loaded into the /home/system/usr/bin directory on the target board.

If the ‘system.initAtBoot’ option has been turned on, then a standard initialization script will be generated and flashed into the /home/system/etc/init.d directory automatically during the application flashing process.

If the ‘system.initAfterFlash’ option has been turned on, then the application will be started as a background service as the last step in the application flashing process.

Example Program

Let’s walk through the steps to create the example Kubos Linux project.

Initialize the project

$ kubos init --linux newproj

Move into the project folder

$ cd newproj

Set the project target

$ kubos target kubos-linux-isis-gcc

Build the project

$ kubos build

Flash the project

$ kubos flash

Log into the board

$ minicom kubos
Login: root/Kubos123

Run the example application

$ newproj

Output should look like this:

Initializing CSP
Starting example tasks
Ping result 80 [ms]
Packet received on MY_PORT: Hello World
Ping result 90 [ms]
Packet received on MY_PORT: Hello World
Ping result -1 [ms]
Packet received on MY_PORT: Hello World
Ping result 60 [ms]
Packet received on MY_PORT: Hello World
Ping result 50 [ms]
Packet received on MY_PORT: Hello World

Press Ctrl+C to exit execution.

Press Ctrl+A, then Q to exit minicom.

Flashing Non-Application Files

Warning

Please make sure to either logout of your board, or change it back to the root user’s home directory before beginning any file transfer

If you would like to flash a file other than the application binary onto your board, you can add an additional parameter to the usual flash command:

$ kubos flash {absolute-path-of-file}

If the name of the file matches the name of the application, as specified in the module.json file, then the file is assumed to be the application binary and will be loaded into /home/system/usr/bin on the target board.

If the name of the file ends in *.itb, the file is a Kubos Linux upgrade package and will be loaded into the upgrade partition of the target board. An internal variable will be set so that the upgrade package will be installed during the next reboot of the target board.

All other files are assumed to be non-application files (ex. custom shell scripts) and will be loaded into /home/system/usr/local/bin. Once they have been flashed, these files can then be manually moved to another location.

Note: The file does not need to reside within a Kubos SDK project, but the kubos flash command must still be run from the project, since that is where the target configuration information is stored.

For example:

$ kubos flash /home/vagrant/not-my-project/test-util.sh

Flash Troubleshooting

See the Flash Troubleshooting of our FAQ guide for troubleshooting tips.

Manual File Transfer

If for some reason you want to manually transfer a specific file onto the target board, for example a custom script, you’ll need to do the following:

Connect to the board through minicom (the file transfer protocol is not guaranteed to work with any other terminal program)

$ minicom kubos

Login to the board

Welcome to minicom 2.7

OPTIONS: I18n
Compiled on Feb  7 2016, 13:37:27.
Port /dev/FTDI, 21:26:43

Press CTRL-A Z for help on special keys


Welcome to Kubos Linux
(none) login: root
Password:
Jan  1 00:00:11 login[210]: root login on 'ttyS0'
~ #

Navigate to the location you’d like the received file to go.

~ # mkdir righthere
~ # cd righthere
~/righthere #

Issue the zModem command to prep the board to receive a file

$ rz -bZ

Press Ctrl+a, then press s to open the minicom file transfer dialog.

+-[Upload]--+
| zmodem    |
| ymodem    |
| xmodem    |
| kermit    |
| ascii     |
+-----------+

Select zmodem

+-------------------[Select one or more files for upload]-------------------+
|Directory: /home/vagrant                                                   |
| [..]                                                                      |
| [linux]                                                                   |
| [newprj]                                                                  |
| minicom.log                                                               |
|                                                                           |
|              ( Escape to exit, Space to tag )                             |
+---------------------------------------------------------------------------+

               [Goto]  [Prev]  [Show]   [Tag]  [Untag] [Okay]

Select the file to send:

Press g to open the Goto dialog and navigate to the desired folder (full pathname required).

Press enter to open the file selector dialog and specify the file you want within the current folder.

+-------------------[Select one or more files for upload]-------------------+
|Directory: /home/vagrant/linux/build/kubos-linux-isis-gcc/source           |
| [..]                                                                      |
| [CMakeFiles]                                                              |
| CMakeLists.txt                                                            |
| CTestTestfile.cmake                                                       |
| cmake_install.cmake                                                       |
| linux                                                                     |
| linux.map                                                                 |
|                +-----------------------------------------+                |
|                |No file selected - enter filename:       |                |
|                |> linux                                  |                |
|                +-----------------------------------------+                |
|                                                                           |
|              ( Escape to exit, Space to tag )                             |
+---------------------------------------------------------------------------+

               [Goto]  [Prev]  [Show]   [Tag]  [Untag] [Okay]

You should see a progress dialog as your file is transferred to the board.

+-----------[zmodem upload - Press CTRL-C to quit]------------+
|^XB00000000000000rz waiting to receive.Sending: linux        |
|Bytes Sent:  41984/  99084   BPS:8905     ETA 00:06          |
|                                                             |
|                                                             |
|                                                             |
|                                                             |
|                                                             |
+-------------------------------------------------------------+

Once file transfer is complete, you should be able to press enter and use your new file

+-----------[zmodem upload - Press CTRL-C to quit]------------+
|^XB00000000000000rz waiting to receive.Sending: linux        |
|Bytes Sent:  99084   BPS:7982                                |
|                                                             |
|Transfer complete                                            |
|                                                             |
| READY: press any key to continue...                         |
|                                                             |
+-------------------------------------------------------------+

Press Ctrl+a, then q to bring up the dialog to exit minicom. Hit enter to quit without reset.

Using Peripherals

Each board has a variety of different ports available for interacting with peripheral devices. Currently, users should interact with these devices using the standard Linux functions. A Kubos HAL will be added in the future.

Please refer to the appropriate Working with {board} document for more information about the specific peripheral availability.

User Accounts

In general, it is preferred to use a non-root user account to interact with a Linux system. A default user account ‘kubos’ is included with Kubos Linux. Other user accounts can be created using the standard Linux commands (adduser, useradd, etc).

All user accounts should have a home directory in the format ‘/home/{username}’.

The passwd command can be used to change the password of existing user accounts.

If you change the root user’s password, be sure to also update the password in any Kubos SDK project configurations.

Kubos Linux File System

There are a few key directories residing within the Kubos Linux user space.

/home

All user-created files should reside under the /home directory. This directory maps to a separate partition from the root file system. As a result, all files here will remain unchanged if the system goes through a kernel upgrade or downgrade.

The home directories of all user accounts, except root, should live under this directory.


Any files not residing under the /home directory will be destroyed during an upgrade/downgrade


/home/usr/bin

All user-created applications will be loaded into this folder during the kubos flash process. The directory is included in the system’s PATH, so applications can then be called directly from anywhere, without needing to know the full file path.

/home/usr/local/bin

All user-created non-application files will be loaded into this folder during the kubos flash process. There is currently not a way to set a destination folder for the kubos flash command, so if a different endpoint directory is desired, the files will need to be manually moved.

/home/etc/init.d

All user-application initialization scripts live under this directory. The naming format is ‘S{run-level}{application}’.